Last updated: 30/08/2023 05:46:43
KLUBERBIO AG 39-602 N 25 KG BUCKET
- Product group:
- Product number:
KLÜBERBIO AG 39-602 N is an Environmentally Acceptable Lubricant (EAL) designed to protect your open gears and steel cables. Strongly adhesive, water-resistant, and anti-corrosive.
Open gears and steel ropes operating in a maritime environment are subject to extreme loads and requirements. Saline and humid air, strong temperature fluctuations and splash water or constant contact with seawater take their toll on the equipment used.
The high-performance adhesive lubricant Klüberbio AG 39-602 N meets these demanding requirements by its good adhesion to surfaces as well as due to its excellent anticorrosive effect. To deal with the high load carrying requirements present in onboard applications, we designed Klüberbio AG 39-602 N with a highly effect anti-wear additive. This contributes to long component life, which in turn leads to less lubricant consumption and labour costs. In addition to the EU Ecolabel, Klüberbio AG 39-602 N complies with the requirements for classification as an Environmentally Acceptable Lubricant (EAL) in terms of biodegradability, toxicity and bioaccumulation, as defined by the US Environmental Protection Agency for the "2013 Vessel General Permit". The EU Ecolabel is a label of environmental excellence that is awarded to products and services meeting high environmental standards throughout their life cycle: from raw material extraction, to production, distribution and disposal.
- Meets the requirements for Environmentally Acceptable Lubricants (EAL) as defined in Appendix A of the 2013 Vessel General Permit
- Long relubrication intervals due to good adhesion and water resistance.
- Corrosion protection also under influence of seawater due to specially selected anti-corrosion additives
- Contributes to the achievement of your sustainability goals:
- Less impact on the environment due to high content of renewable raw materials
- Extended component life due to reduced wear for less strain on resources and material consumption
|Invent Hazard Material (IMO/EU) classification||C-30|
|Biodegradability of the base oil, acc. to OECD 301 F, (within 28 days) [%]||>= 60|
|Density at 20°C [g/cm³]||approx. 0.95|
|Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °C [mm²/s]||approx. 65|
|Kinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °C [mm²/s]||approx. 600|
|Packing Size||25 KG|
|Chemical composition, thickener||Calcium soap|
|Chemical composition, type of oil||Ester oil|
|Flow pressure of lubricating greases, DIN 51805, test temperature: -20 °C [mbar]||≤1400|
|Shelf life [months]||36|
|"Copper corrosion, DIN EN ISO 2160, 24 h/100°C"||1 - 100 corrosion degree|
|Corrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water||<= 1 corrosion degree|
|Drop point, DIN ISO 2176, IP 396 [°C]||>= 130|
|FZG scuffing test, based on DIN ISO 14635, A/2,76/50, scuffing load stage||>= 12|
|Lower service temperature||-20 °C / -4 °F|
|Oil separation, DIN 51817 N, after 7 d/40 °C||<= 5 % by weight|
|Upper service temperature||120 °C / 248 °F|
|Water resistance, DIN 51807 pt. 01, 3 h/90 °C, rating||0 - 90|
|Worked penetration, DIN ISO 2137, 25 °C, lower limit value [mm]||290 x 0.1 mm|
|Worked penetration, DIN ISO 2137, 25 °C, upper limit value [mm]||330 x 0.1 mm|
Safety Data Sheet (SDS)
Directions for use
Klüberbio AG 39-602 N can be applied continuously through transfer lubrication with pinion or by brush. Compressed-air lubrication equipment can be used for the lubrication of steel cables. The required lubricant quantity depends on the operating conditions in each individual case. Our sales engineers will be pleased to assist you in determining lubricating quantities.