Last updated: 01/11/2023 00:54:46
ALUMAG 235 3.0MM GAS TIG WELD 0.5KG
Product Code
- Product group:
- 092
- Product number:
- 514265
TIG welding rod for aluminium, sea water resistant aluminium and cast aluminium, containing up to 5% Mg.
Product information
Seawater resistant aluminium-magnesium rod for gas welding of pure aluminium, seawater resistant aluminium and cast aluminium.
Features
- Can be used for pure aluminium, seawater resistant aluminium and cast aluminium.
Benefits
- Can be used for gas welding and TIG welding
- Wide range of aluminium welding application e.g., repair of aluminium cover plate and castings
Specification
General
| Invent Hazard Material (IMO/EU) classification | NA |
|---|---|
| Werkstoff No. | 3.3556 |
Dimensions/Weight
| Diameter [mm] | 3.0 |
|---|---|
| Length | 500 mm |
| Weight [kg] | 0.5 |
Technical data
| AWS | A5.10: ER5356 |
|---|---|
| Polarity | AC |
Safety Data Sheet (SDS)
Documents
Directions for use
The label on each container fully identifies the contents, and also gives basic information on application areas. Complete information on each rod, and instructions for use are given in the handbook for Maritime Welders.
- Use pure argon as shielding gas for TIG Welding with UNITOR UWI-230 TP AC/DC welding inverter
- Use with Unitor ALUFLUX - 234 F for gas welding
- Ensure good surface preparation i.e., use only stainless steel abrasive discs or brush for grinding or cleaning
- Cast aluminium should be pre-heated to approximately 300oC before welding and ensure they are well supported to avoid sagging from heat and after welding, to allow slow cool
