Last updated: 12/02/2023 13:54:31
PICKLING GEL 2L F/STAINLESS STEEL
Product Code
- Product group:
- 095
- Product number:
- 661778
Pickling gel for discoloration removal and passivation of surface especially after stainless steel welding.
Product information
This product supersedes product no: 661777
Unitor pickling gel is used to remove oxides and discoloration on stainless steel welds and surrounding surfaces.
Features
- HD polyethylene container supplied together with brush
- In gel state
Benefits
- Safe handling and ready to use
- Product will stick in vertical and overhead positions
- Removes surface micro slag particles and other contaminates after welding which may cause local corrosion
- Pickling restores completely the materials corrosion resistance
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-49 |
|---|
Dimensions/Weight
| Weight [kg] | 2.5 |
|---|
Technical data
| Shelf life [months] | 13 months stored at 20°C in unopened condition |
|---|
Approvals
ASTM 380 and ASTM 967
Safety Data Sheet (SDS)
Documents
Directions for use
Recommended temperature limits for application: 10°C - 40°C and do not pickle under direct sunlight
- Stir the gel to a smooth consistency
- Spread a thick layer on to the work surface using the brush supplied
- Allow the gel to remain for 50-90 minutes
- Rinse off the reminding gel using fresh water
- The waste water, after rinsing, contains acids and heavy metals, and must hence be treated according to local wastewater requirements before discharge
