Product information

Mooring tail made from the Timm Master material that combines HT polyester and B5 polyolefin yarns and effectively absorbs shock/energy in mooring systems. Typically used with steel wire and HMPE ropes. It performs better in wet conditions than nylon, providing equal breaking strength under wet and dry conditions. This tail includes Timm's unique Snap Back Arrestor (SBA) in the core that reduces the snap back in case of breakage. Both eyes of this tail are protected by mesh braid that is spliced into the eye and performs much better than usual protective sleeves. Smart Pick up line is installed in the outer eye of the stretcher that will be used over the bollard on the port/terminal side. This 4m long Pick up line is both a tool for easier handling and a safety feature. This should be used to lift the eye of the stretcher on the bollard and release it from the bollard. Pick up line will prevent the accident of the hand getting stuck between the eye and the bollard in case of unexpected movements. The white and blue colours of the product will easy indicate if there is twist in the rope. Twist on ropes will decrease the strength of the tail and should be avoided. These tails fit perfectly to our Acera Amundsen and Acera daGama HMPE portfolio.

The stretcher breaking strength is given by Tail Design Break Force TDBF as per OCIMF MEG4, equal to value of MBL spliced.


  • Integrated Snap Back Arrestor
  • Mesh braid protected eyes
  • Buoyant
  • High elongation
  • Pick up line included
  • White and blue anti-twist color indicator


  • Reducing snap back if ropes breaks
  • Class leading strength-to-weight ratio
  • Twist indication and possibility of improved life span
  • High abrasion and UV resistance
  • Type Approved by DNV GL
  • 15-20% lighter than PES and nylon tails
  • Excellent abrasion and UV resistance
  • Smooth and gripable surface
  • Meets all OCIMF requirements


Ordering information


Type Approved Product by DNV GL.
This product is produced according to ISO 9554 and tested according to ISO 2307 and OCIMF MEG4. Minimum Breaking Load (MBL) is according to ISO 10556 and verified by DNV GL.

Snap Back Arrestor is a verified product by DNV GL.