- Product group:
- Product number:
Spectrapak™ 309 - Cooling Water Test Kit. Compact test kit package to enable you to maintain control of engine cooling water quality for optimum corrosion protection. Test included: Nitrite, Chloride & pH
This product supersedes product no: 555466
Test recommended to maintain cooling water within the prescribed limits.
Nitrite - Recommended Limits can be in the range of 700-2400 ppm as NO2. Please refer to the inhibitor Product Data Sheet for product specific control limits. The nitrite concentration should be maintained within the above recommended limits to effectively inhibit any corrosive or scaling action within a closed cooling system. Too high a concentration should be avoided to minimize the cost to maintain the system. Insufficient dosage can set up a condition where accelerated corrosion can occur in areas which become unprotected.
pH - Recommended Limits 8.3-10. The effectiveness of a corrosion inhibitor is restricted to within a certain pH range. Treatment ensures that this pH range is observed when the nitrite level is sufficiently maintained to prevent corrosion.
Chlorides - Recommended limit max. 50 ppm. The chloride value of the cooling water should be kept as low as possible, any increase in value whether sudden or gradual, will be an indication of sea water contamination. Check with engine manufacturer for other specified limits. If the chloride level exceeds 50 ppm, the possibility of corrosion in the system increases because chlorides have a negative effect on the passivation film created by nitrites. Therefore, until corrective action has succeeded in bringing the chloride level back down below 50 ppm, the nitrite level should be kept close to the upper limit (2400 ppm).
Instruction sheet, 1 x Stirring Rod, 1 x 5ml Syringe, pH Test Papers 6.6-10 pk. 100, 1 x 100ml shaker tube, Chloride Test Tablets btl. 250, Nitrite No.1 Test Tablets btl. 100 , Nitrite No.2 Test Tablets btl. 250 ( 2 bottles).
- Sturdy plastic case
- Simple to use test kit
- Test methods included
- Helps to maintain optimum corrosion protection
- Protects valuable equipment assets
|Invent Hazard Material (IMO/EU) classification||C-55|
555714 SHAKER TUBE 309 TEST KIT Product number: 555714
778648 PLASTIC STIRRING RODS (10) Product number: 778648
555698 PH PAPER F/ 309 TEST KIT Product number: 555698
739458 CHLORIDE TEST TABLETS BOTTLES 2 X 250 Product number: 739458
555631 NITRITE NO.2 TABLETS (2 BOTTLES X 250) Product number: 555631
555623 NITRITE NO.1 TABLETS (2 BOTTLES X 100) Product number: 555623
Is consumable by
6348d29e4cedfd000103f3d0 NX1100 5 Gal Pail (Biocide for USA/CAN) Product number: 6348d29e4cedfd000103f3d0
777044 BRINE CORROSION INHIBITOR 25 LITRE Product number: 777044
571356 ROCOR NB LIQUID 25 LTR Product number: 571356
735977 MAR-71 BIOCIDE 3X5L NOT IN USA&CAN Product number: 735977
778640 NALFLEET 2000 5LTR Product number: 778640
777703 ENGINE WATER TREATMENT25 LTR(9108) Product number: 777703