Product information

Unitor™ EASYCLEAN™ FLOOR & HARD SURFACE is recommended for use in public areas such as floors, tiles, paint work, furnishes, plastics, vinyl as well as sanitary fixtures.

To ensure the concentrated product is made up in the correct concentration it is recommended to use the Unitor™ MIXING STATION 4 - 4 or Unitor™ MIXING STATION 4 - 14. This will ensure the correct dosage for optimum cost efficiency and help save the environment - do no not use higher concentration than necessary. Do not mix with other cleaning products, and drain the cleaning solution to the bilge if the wash water after use is considered as environmentally hazardous.

Features

  • Phosphate free
  • Concentrated to improve cost efficiency

Benefits

  • Since the product is delivered as a concentrate the need for available storage space will be limited
  • Concentration of cleaning solution can be altered based on degree of contamination

Specification

Safety Data Sheet (SDS)

Documents

Directions for use

For use with bucket and mop:

  1. Dilute the concentrate 1 : 100 ( 1% ) through the UNITOR™ MIXING STATION 4 - 14
  2. Clean floors using a mop, rag or cloth , use plenty of cleaning solution
  3. On stubborn spots, rub harder or leave the cleaning solution to work for some time
  4. To obtain best cleaning effect, collect the water using a Squeegee
  5. Mop up the water using a clean mop, rag or sponge. If not, leave to air dry

For use with spray bottle and rag:

  1. Dilute the concentrate 1 : 200 ( 0,5% ) through the UNITOR™ MIXING STATION 4 - 4
  2. Spray the solution on the hard surfaces that is being cleaned
  3. Use a rag or cloth to wipe over the hard surface, rubbing extra on stubborn stains
  4. Remove excess water
  5. Leave to air dry