Product information

Unitor™ USC is free from hydrocarbon solvents, biodegradable, and safe to handle.


  • Water-based cleaner
  • Low-toxic and Biodegradable
  • Non-flammable
  • Free of hydrocarbon solvents
  • Specially developed for use with ultrasonic cleaning baths
  • Self splitting


  • Removes grease, oil, carbon deposits, soil and grime
  • Keeps loosened deposits in suspension preventing re-deposition
  • Effective and economical in use


Safety Data Sheet (SDS)


Directions for use

Dosing method
Unitor™ USC is specially formulated for use in the Unitor™ Ultrasonic Cleaners.

Fill the ultrasonic unit with approx. 30 litres of clean fresh water.

Prior to use, the ultrasonic bath must be de-gassed. Allow the bath to run for 1-2 minutes without any objects or cleaning agent until the evolution of gas bubbles ceases. This is to enhance the cleaning effect.

Mix in 1 litre Unitor™ USC. For stubborn deposits, a second litre may be added.

Best results are obtained at temperatures of 60-80°C.

Time necessary for cleaning depends on the nature and thickness of the deposits. 20-30min. will suffice for most applications. Hardened, carbonised or aged deposits may require up to 4 hours.

If the cleaning solution is not heavily contaminated, it may be re-used at a later stage.

Sampling and testing
Suitable for cleaning engine components like fuel and lube oil filters, pump components, inlet and exhaust valves etc.