Search page

We found 1669 search results.

Narrow the search result by using the filters.

You can also find relevant contacts and locations here

Showing 1-10 of 1669 search results
  • Course | Updated

    Plasma Cutting Training Programme

    Plasma cutting is a modern and advanced technology for metal cutting, offering a high-performance alternative to conventional gas cutting methods. This process not only ensures enhanced safety and efficiency but also delivers clean, precise cuts and is highly economical
  • Course | Updated

    Steering Test

    Steering capability assessment of the seafarer is carried out on a full mission bridge simulator on a vessel model as per the client’s requirements. IMTC has ship models of Bulk carrier / Tanker / PCC / LPG / LNG / Container of different sizes. The actual test
  • Course | Updated

    Corrosion Protection and Paint Technology (Management Level) (CPPT)

    All vessels need to be well maintained, both technically and cosmetically. A presentable vessel is essential in a fiercely competitive industry, since Charterers as well as inspectors look favorably upon a vessel where housekeeping is given a high priority
  • Course | Updated

    Engine Room Simulator and Team Management (IMO 2.07) (ERSTM)

    The course is conducted on Kongsberg engine room simulator in accordance with requirements of STCW convention 1978, as amended, A-III/1, AIII/2, B-I/12 item 73, B-VIII/2 of STCW code and IMO model course 1.40 and 2.07. This course is intended to give familiarization
  • Course | Updated

    Ship to Ship Transfer - Advanced

    The aim of this course is to train Master/Deck officers in the Ship to Ship oil transfer procedures and emphasizes the critical points that must be noted if accidents are to be avoided right through all the key stages, from earliest pre planning to the final
  • Course | Updated

    Basic Hydraulics Workshop (HYDM)

    In view of the enormous use of hydraulic equipment and systems on board all types of vessels and the operation of such systems by Navigating Officers, it is imperative that they possess sufficient knowledge of the subject to enable them to operate these systems
  • Course | Updated

    Maritime Resource Management (MRM)

    Safety of life and property at sea, protection of the marine environment, and efficiency of Vessel operations, are the common goals shared by all Vessel owners and operators. Against this backdrop, an appreciation of the ‘Human Elements’ and performance of
  • Course | Updated

    Maritime Resource Management – Simulator Practical (MRM-P)

    Safety of life and property at sea, protection of the marine environment, and efficiency of Vessel operations, are the common goals shared by all Vessel owners and operators. Against this backdrop, an appreciation of the ‘Human Elements’ and performance of
  • Course | Updated

    Marine Electrical Workshop (MEW)

    Electrical knowledge has traditionally been a weak area for most marine engineers. This program has been specifically developed to fill this acutely felt training need. Covering advanced aspects of shipboard electrical knowledge, this workshop, conducted Online
  • Course | Updated

    Bulk Carriers Safety

    Bulk carriers are the work horses of the merchant fleet and carry all kind of bulk cargoes. Bulk carrier operators must be aware of the specific safety concerns related to this type of ship. Loading of cargo must be done carefully, to ensure cargo cannot shift

  • TIMM MASTER 12 SBA TAIL FT130 [83MM]30M


  • ACERA DAGAMA SBA S115 [40MM/46MM] 250M


  • LONGCUT UPH-125 SET


  • FLATCUT UPH-125 SET


  • UNITOR AEROFLOW DOUBLE DIAPHRAGM PUMP 1/2 INCH SS - FLUID BARBS + COLLAR CLAMPS (2PCS EACH)


  • UNITOR AEROFLOW DOUBLE DIAPHRAGM PUMP 1/2 INCH SS - AIR BARBS (2PCS)


  • LANCE 2.5M WITH NOZZLE FOR HPC AIRCLEAN 480 EX-PRO


  • LANCE 1.5M WITH NOZZLE FOR HPC AIRCLEAN 480 EX-PRO


  • HOSE 15M FOR HPC AIRCLEAN 480 EX-PRO


  • HOSE 25M FOR HPC AIRCLEAN 480 EX-PRO