FUEL POWER CATALYST 25 LTR

_Product Code

Product group:
650
Product number:
778787

Unitor™ FuelPower™ Catalyst has been formulated to help improve combustion while at the same time make sure the fuel is stable and homogeneous.

Product information

The fuel ignition temperature is reduced, resulting in increased combustion efficiency with less carbon left to form smoke and soot. Engine and exhaust systems are kept cleaner with longer service life and less maintenance.

Anti-polymerisation agents inhibit sludge formation, while dispersants stabilise the fuel. This results in a cleaner fuel system and better fuel flow, giving improved fuel atomisation and greater combustion efficiency.

Sulphuric acid corrosion caused by condensing exhaust gases may be seen in any of the cooler parts of the boiler or engine system. Typical problem areas are cylinder liners (clover-leaf corrosion), valve stems and funnel uptakes. Unitor FuelPower Catayst catalytically inhibits the formation of acid gases. This reduces the amount of acid present, thereby reducing acid corrosion.

Features

  • Improves combustion by reducing the burn out temperature for the soot
  • Reduces carbon/ash deposits
  • Limits soot formation and smoke emissions

Benefits

  • You will see an overall improvement in fuel combustion and a reduction in the soot emissions
  • Helps you to keep the fuel system in good shape and to make sure the fuel is stable and ready for combustion

Specification

Physical properties

Appearance Dark brown
Density [kg/dm3] 1,0
Flash Point [°C] >61
Form Clear and dark brown

Technical data

Not Compatible May swell rubber and synthetic rubber

SDS

Documents

Directions for use

Dosage and control
Unitor FuelPower Catalyst is completely oil-soluble and should be added via a metering pump into the suction side of the booster pump. Alternatively, it can be added into the settling tank. If so, the dose rate should be increased by 10%. As a general guide, the average dosage should be 1:15 000. Alterations can then be made according to operating experience and results obtained. Where fuel analysis for Micro Carbon Residue, (MCR) is available, dose according to the table below:

MCR%

10

12

14

16

18

Dosage Rate

1:15 000

1:12 000

1:10 000

1:7 500

1:4 000

CCAI

835

840

845

850

850+

Dosage Rate

1:15 000

1:12 000

1:10 000

1:7 500

1:4 000

Unitor FuelPower Catalyst can be dosed using Fuel Oil Treatment Dosing Unit, product No 664 619353.