Last updated: 14/12/2023 02:00:35
FUEL POWER ASHFREE 25 LTR
Product Code
- Product group:
- 650
- Product number:
- 779090
Unitor™ FuelPower™ AshFree is the solution for combustion and deposit issues with VLSFO introduced through IMO 2020. Unitor™ FuelPower™ AshFree is formulated to protect against deposit build-up on sensitive engine parts. The product also ensures good combustion to avoid additional build-up of insulating soot deposits.
Product information
This product supersedes product no: 778789
Unitor FuelPower AshFree modifies fuel ash, raising the melting points of the ash above the normal engine operating temperatures. Modified ash particles are non-adhesive and follow the exhaust gas stream. Deposits on valve seats are reduced, turbocharger and exhaust system fouling are controlled. Exhaust systems remain cleaner and any ash that is formed is friable and easily removed by conventional methods such as brushing. Unitor FuelPower AshFree help to control acid formation. Sodium Vanadate increase the formation of sulphur trioxide during combustion. The sulphur trioxide reacts with moisture in the exhaust system to form sulphuric acid. Unitor FuelPower AshFree reduce sodium vanadate vanadium formation reducing the acid formation and cold corrosion. The combustion catalyst improves combustion resulting in increased combustion efficiency with less carbon left to form smoke and soot. Engine and exhaust systems are kept cleaner with longer service life and less maintenance.
Features
- Raises the melting point of corrosive ashes
- Reduces the high temperature corrosion on sensitive surfaces
- Keeps exhaust valves and turbochargers clean
Benefits
- You can rely on Unitor™ FuelPower AshFree to keep your sensitive engine parts free from corrosive deposits
- Reduction of deposits and corrosion ensures your engine operates more efficiently
Specification
General
| Invent Hazard Material (IMO/EU) classification | C-6 |
|---|
Physical properties
| Appearance | Dark red to black |
|---|---|
| Density [kg/dm3] | 1,0 |
| Flash Point [°C] | >61 |
| Form | Liquid |
Technical data
| Not Compatible | May swell rubber and synthetic rubber |
|---|
Safety Data Sheet (SDS)
Documents
Directions for use
Dosage and control
Unitor FuelPower AshFree should be dosed either directly into the service tank or by automatic metering into the suction side of the booster pumps. Typical dose rates vary between 1:2000 and 1:6000 depending on the nature and severity of the problem. Use the table below for optimum dosage.
Sodium ppm |
Vanadium 50ppm |
Vanadium 100ppm |
Vanadium 150ppm |
Vanadium 200ppm |
Vanadium 300ppm |
Vanadium 400ppm |
Vanadium 500ppm |
|
|---|---|---|---|---|---|---|---|---|
Tons of fuel |
||||||||
25 |
6 |
8 |
5 |
4 |
3 |
2,5 |
2,5 |
|
35 |
4 |
8 |
5 |
4 |
3 |
2,5 |
2,5 |
|
50 |
4 |
4 |
5 |
4 |
3 |
2,5 |
2,5 |
|
65 |
3 |
4 |
4 |
4 |
3 |
2,5 |
2,5 |
|
75 |
3 |
4 |
3 |
4 |
3 |
2,5 |
2,5 |
|
85 |
3 |
4 |
3 |
4 |
3 |
2,5 |
2,5 |
|
100 |
3 |
4 |
3 |
4 |
3 |
2,5 |
2,5 |
|
Dosage based |
on MCR |
|||||||
MCR% |
10 |
12 |
14 |
16 |
18 |
|||
Dose |
1:6000 |
1:4000 |
1:3000 |
1:2000 |
1:1000 |
Example: A fuel contains 50ppm Sodium and 150ppm Vanadium. The dose rate should therefore be: 1 Itr Unitor FuelPower AshFree per 5 tons of fuel (1:5000)
