FUEL POWER ASHFREE 25 LTR

_Product Code

Product group:
650
Product number:
778789

Unitor™ FuelPower™ AshFree is especially formulated to protect against the build up of deposits on sensitive engine parts. The product also ensure good combustion to avoid additional build up of insulating soot deposits.

Product information

Unitor FuelPower AshFree physically modifies fuel ash, raising the sinter and melting points of the ash above the normal engine operating temperatures. Modified ash particles are solid, small and non-adhesive and are ejected with the exhaust gas stream. Valve seating remain intact as ash deposits on valve seats are reduced. Guttering is minimised and valve cone and seat lives are extended, allowing for greater time between overhauls. Turbocharger and exhaust system fouling is controlled as the ash particles in the gas stream are less adhesive. Exhaust systems remain cleaner and any ash that is formed is friable and easily removed by conventional methods such as brushing.

Another advantage found with Unitor FuelPower AshFree is acid reduction. Vanadium in the fuel has a catalytic action, increasing the conversion from sulphur dioxide to sulphur trioxide during combustion. The sulphur trioxide then reacts with steam in the exhaust system, increasing the dew point to form sulphuric acid. Unitor FuelPower AshFree keeps the complex vanadium and sodium ash compounds in a solid, non-molten state, inhibiting fused salt corrosion.

The combustion catalyst improves combustion by reducing the energy needed to oxidise the soot, resulting in increased combustion efficiency with less carbon left to form smoke and soot. Engine and exhaust systems are kept cleaner with longer service life and less maintenance.

Features

  • Raises the melting point of corrosive ashes
  • Reduces the high temperature corrosion on sensitive surfaces
  • Keeps exhaust valves and turbochargers clean

Benefits

  • You can rely on Unitor FuelPower AshFree to keep your sensitive engine parts free from corrosive deposits
  • Reduction of deposits and corrosion ensures your engine operates more efficiently

Specification

Physical properties

Appearance Clear light brown
Density [kg/dm3] 1,1
Flash Point [°C] >61
Form Liquid

Technical data

Not Compatible May swell rubber and synthetic rubber

SDS

Directions for use

Dosage and control
Unitor FuelPower AshFree should be dosed either directly into the service tank or by automatic metering into the suction side of the booster pumps. Typical dose rates vary between 1:2000 and 1:6000 depending on the nature and severity of the problem. Use the table below for optimum dosage.

Sodium ppm

Vanadium 50ppm

Vanadium 100ppm

Vanadium 150ppm

Vanadium 200ppm

Vanadium 300ppm

Vanadium 400ppm

Vanadium 500ppm

Tons of fuel

25

6

8

5

4

3

2,5

2,5

35

4

8

5

4

3

2,5

2,5

50

4

4

5

4

3

2,5

2,5

65

3

4

4

4

3

2,5

2,5

75

3

4

3

4

3

2,5

2,5

85

3

4

3

4

3

2,5

2,5

100

3

4

3

4

3

2,5

2,5

Dosage based

on MCR

MCR%

10

12

14

16

18

Dose

1:6000

1:4000

1:3000

1:2000

1:1000

Example: A fuel contains 50ppm Sodium and 150ppm Vanadium. The dose rate should therefore be: 1 Itr Unitor FuelPower AshFree per 5 tons of fuel (1:5000)