DIESELPOWER LUBRICITY 25 LTR
- Product group:
- Product number:
Unitor™ DieselPower™ Lubricity is formulated to enhance the lubricity of diesel fuels.
Unitor DieselPower Lubricity has been found to be particularly effective in ultra low sulphur diesel fuels and gas oils that are blended to meet governmental regulations on fuel sulphur content.
Unitor DieselPower Lubricity also provides excellent performance as a lubricity improver component in diesel detergent packages and does not affect the water emulsification tendency of a fuel as measured by ASTMD-1094.
- Improves the lubricity of low sulphur diesel fuels
- Can be used as a stand-alone product or component in diesel packages
- Effective at 50-150 ppm range in meeting the HFRR requirement for lubricity specifications
- Does not interact with the fuel
- Protects your engine from wear so you can avoid unscheduled and expensive maintenance
- Quality is ensured so you can rest easy with good engine protection
- You can safely use the product in all types of fuels
|Flash Point [°C]||>70|
|Materials compatibility||Teflon, Viton , Plasite 10-7122, Plasite 10-9500, Mild Steel, Mild Aluminium, Brass, 304 SS, 316 SS and copper|
|Pour Point [°C]||-9|
|Solubility||Insoluble in water, soluble with most organic solvents|
|Not Compatible||Natural Rubber, Vinyl, Polyethylene, Neoprene, PVC, Hypalon, Buna-N , Polypropylene, Plexiglas, Ethylene, Propylene Rubber and Polyurethane|
Directions for use
Preferable application of DieselPower Lubricity is directly into the transfer pump suction to ensure proper mixing. Product may be added to storage or blending tanks with adequate mixing. Dosage of DieselPower Lubricity may vary depending on the fuel quality.
Sampling and Testing
DieselPower Lubricity also provides excellent performance as a lubricity improver component in diesel detergent packages and does not affect the water emulsification tendency of a fuel as measured by ASTMD-1094.
Dosing and Control
The normal dosage of DieselPower Lubricity is between 100 and 200 ppm (100 to 200 mls per m3 fuel). Independent testing has shown that an application of around 125ppm can improve the HFRR wear scar performance of ULSD to below the specification level of 460um. DieselPower Lubricity may be blended with other components into diesel detergent packages for ultra low sulphur diesel fuel and has no known adverse interaction with common components such as detergents, pour point improvers, cetane improvers or antifoams.