UNITOR Ultra CIP can be used for cleaning of lube- and fuel oil separators, heat exchangers and pipe systems. Ultra CIP can be used for manual cleaning and Cleaning In Place with cleaning equipment intended for CIP.

Manual Cleaning

For manual cleaning of separator parts and machinery parts.

Use a solution between 5-20% concentration depending on how dirty the equipment to be cleaned is. Both oil and lime will be solved with time, let soak for at least 2 hours. After 2 hours the parts can be cleaned using high pressure cleaners, rinsing or brushing.

Cleaning In Place of Separator

For the lube oil separator use a 20% solution

For the fuel oil separator use a 10% solution

Recommended cleaning temperature is 70-90oC (158-194oF). A normal cleaning cycle is between 1 to 3 hours depending on the dirtiness and character. If the separator has very hard deposits the cleaning cycle may have to be repeated with new cleaning fluid.

• The product is readilly biodegradable
• Does not contain nonyl phenol ethoxylates or other estrogenic compounds.
• Non-flammable.
• Remove heavy tenacious deposits.
• Cleans down to metal surfaces.
• Leaves no film or residue.
• Reduces down time.
• Allows cleaning of dics without dismantling the separator.
• Cleans all types of separator discs.
• The product is self splitting.
• Product is tested and approved by Marinfloc.