General Cleaning
Aquatuff can be used for different types of cleaning, and it can be applied by brush, hand spray, high- and low pressure washing machines etc. It can be applied on vertical surfaces by adding Unitor Foam-Agent (Product no. 651 614537) for increased resident time.

Removal of soot from Inert Gas Systems (IGS)

1. Apply Aquatuff with a Unitor High Pressure Cleaning Machine and use 1:4 with water. However, if used with a hand sprayer, apply the product neat on the surfaces, allowing 1 litre per 12 m2.
2. Leave for about 30-45 minutes. The surface remains wet.
3. Wash down with hot water (80°C) and check the results.
4. Repeat the procedure if necessary.

Cargo hold cleaning
Aquatuff can be used for cargo hold cleaning after soot, coal, pet coke and other bulk materials.

1. Direct injection method with tank washing machines: Use a dose rate of 1-20 litres per ton wash water (0.1-2%).
2. Recirculation method: Use a dose rate of 1-20 litres per ton wash water (0.1-2%).
3. Spot cleaning: Hand spray neat or prepare a 20% solution, and leave for 20-30 minutes before rinsing off with water. The surface should be kept wet.

• Heavy duty water based cleaner.
• Does not contain nonyl phenol ethoxylates or other estrogenic compounds.
• Biodegradable.
• Free from hydrocarbon solvents.
• Removal of soot deposits from inert gas systems.
• Aquatuff is most suitable for removal of wax deposits.
• It has numerous cleaning applications including removal of grease, vegetable and animal oil, soot and general dirt and grime.
• Ideal for cleaning after coal and pet coke.
• Effective and economical in use.
• Completely safe on epoxy coatings.
• Approved by Marinfloc AB for use in engine rooms.