Disclean may be used neat or diluted down to 20% by volume with fresh water, depending on the severity of contamination, availability of heat and time to complete cleaning operation.
The higher the concentration the more efficient the cleaning action.

The time for a cleaning operation will vary from 30 minutes to maximum 2 hours depending on the above factors. Faster and more efficient cleaning can be accomplished by heating to a maximum temperature of 60 °C.

After the unit or parts have been satisfactorily cleaned, they shall be rinsed thoroughly with fresh water to remove all traces of contamination and Disclean.

It is recommended that this product is not used on zinc, tin, galvanised surfaces or anodised aluminium.
The Unitor Chemical Cleaning Unit (Product no. 664 737189) can be used for soak cleaning of disc stacks.

Method of cleaning
Separators can be cleaned by:

1. Removing the separator disc stack and soaking in a solution of Disclean. Circulating the solution and heating will enhance the cleaning.
2. Removing the separator discs and dismantling stack, then soaking discs in Disclean. Circulating and heating the solution will enhance the cleaning. Discs can be sprayed if soaking tank is not available.

• Acid based product contains surfactants.
• Does not contain nonyl phenol ethoxylates or other estrogenic compounds.
• Non-flammable.
• Remove heavy tenacious deposits.
• Cleans down to metal surfaces.
• Leaves no film or residue.
• Reduces down time.
• Allows cleaning of dics without dismantling of disc stacks.
• Cleans all types of separator discs.
• Approved by Marinfloc AB for use in engine rooms.